space voltage controlled crystal oscillator te 200 vcxo series 200 march, 11th 2012 specifications subject to change without n otice shortform, 51000652.110, issue a4 1 / 5 www.rakon.com for this product, full and detailed specifications can be delivered on request. specific request can be addressed to rakon info@rakon.fr product description this itar free space flat pack vcxo is featured by excellent pulling range of +/- 70ppm, good ageing characteristics of +/- 1 ppm per year, low power consumption of 0.15w, compact package size (20x20x1 3mm), and weight of 20g. the main applications are space synthesizers and tr ansponders. these space flat pack vcxos are manufactured in accordance with mil- prf-55310 (class 1, type 2, level s). features frequency range : 10mhz to 40 mhz supply voltage : +5v or +12v low consumption : 30 ma max frequency stability vs. operating temperature : from +/- 10ppm to +/- 15ppm ageing : +/C 5ppm over 15 years output wave form : sine 50 ohms output level : from 0 to 8 dbm component selected as per ecss-q-st-60c materials selected as per ecss-q-70 manufacturing in accordance with: o mil-prf-55310 (class 1, type 2, level s) o ecss-q-st-70-08c and ecss-q-st-70-38c applications gps receivers converters board calculators synthesizers fgu specifications 1.0 environmental conditions line parameters conditions/remarks min nom max unit temperature option a 0 25 50 c temperature option b -20 25 70 c 1.1 operating temperature temperature option c -40 25 85 c 1.2 switch-on temperature tso -40 85 c 1.3 non-operating temperature tnop - 55 125 c 1.4 random vibration level as per mil-std-202), met hod 214, condition i-k (47,60 grms) 1.5 sine vibration level as per mil-std-202), metho d 204, condition d (20g) 1.6 shocks mechanical shock as per mil-std-202, method 213, co ndition e (half sine with a peak acceleration of 1000g for du ration of 0.5 msec) 1.7 radiation tid : 100 krad, low dose rate no sel up to let=60 mev/mg/cm2
space voltage controlled crystal oscillator te 200 vcxo series 200 march, 11th 2012 specifications subject to change without n otice shortform, 51000652.110, issue a4 2 / 5 www.rakon.com 2.0 electrical interface 3.0 performances line parameters conditions/remarks min nom max unit supply option 1 4.75 5.0 5.25 v 2.1 power supply supply option 2 11.4 12.0 12.6 v 2.2 load impedance 45 50 55 w 2.3 control voltage 0 5 v radj calibration option a 0 10 k w 2.4 adjustment resistor calibration option b na na na line parameters conditions/remarks min typ max unit 3.1 nominal frequency 10 40 mhz 3.2 steady state input current power (rnom) 30 ma 3.3 initial frequency accuracy calibration option a rnom 1 ppm negative slope radjmin +5 ppm 3.4 frequency adjustment calibration option a radjmax - 5 ppm frequency control control voltage option a 40 p pm 3.5 control voltage option b 70 ppm temperature option a 10 ppm temperature option b 10 3.6 frequency stability vs temperature temperature option c 15 3.7 frequency variation vs. supply voltage over operating temperature 0.5 ppm 3.8 frequency variation vs. load over operating tem perature 0.5 ppm 3.9 frequency ageing over 1 years 1 ppm 3.10 output waveform sine 3.11 output level 0 dbm 3.12 harmonics level C 30 dbc 3.13 spurious level C 80 dbc 3.14 phase noise noisefloor C 145 dbc/hz
space voltage controlled crystal oscillator te 200 vcxo series 200 march, 11th 2012 specifications subject to change without n otice shortform, 51000652.110, issue a4 3 / 5 www.rakon.com 4.0 mechanical features 5.0 pin description line pin number name function 5.1 1-3-7-12-14 gnd electrical & mechanical ground 5.2 2 vcc supply voltage radj calibration option a resistor adjustment 5.3 4 nc calibration option b do not connect 5.4 6 vc control voltage input 5.5 5-9-10-11 nc do not connect 5.6 13 fout frequency output weigh t 2 0 grams
space voltage controlled crystal oscillator te 200 vcxo series 200 march, 11th 2012 specifications subject to change without n otice shortform, 51000652.110, issue a4 4 / 5 www.rakon.com 6.0 model philosophy representativeness engineering model engineering qualification model qualification model flight model flight model + lot acceptance test (option a) (options b, c) (option d) (options e, f, g, h) (option i) component passive commercial parts active parts from the same manufacturer of hirel parts mil grade parts procured from the same manufacturer of hirel parts hirel parts hirel parts hirel parts crystal material swept quartz stabilized swept quartz stabilized swept quartz escc3501 stabilized swept quartz escc3501 stabilized swept quartz escc3501 stabilized mechanical interface flight representative in form-fit- function flight representative in form-fit-function flight design flight design flight design electrical interface flight design flight design flight design flight design flight design tests acceptance testing qualification testing qualification testing (including screening) acceptanc e testing (including screening) acceptance testing (including screening)+ lat workmanship ipc610 ecss-q-st-70-08 & 70-38 ecss-q-st-70- 08 & 70-38 ecss-q- st-70-08 & 70-38 ecss-q-st-70-08 & 70-38 7.0 flight model screening according to mil-prf-55310 full level s (option e) level s with combined burn in aging of 480 hours (o ption f) full level b (option g) level b with combined burn in aging of 480 hours (o ption h) lot acceptance test could be performed on all scree ning options 8.0 options for engineering qualification model production manufacturing, qualification flow includ ing qualification mechanical tests (option b) production manufacturing, electrical tests only (op tion c) 9.0 deliverable documentation test data full specification certificate of conformity (coc)
space voltage controlled crystal oscillator te 200 vcxo series 200 march, 11th 2012 specifications subject to change without n otice shortform, 51000652.110, issue a4 5 / 5 www.rakon.com 10.0 ordering part number definition the part number breakdown is defined as follows: series supply voltage 1 = 5v 2 = 12v temperature range/stability a = 0c to +50c, 10 ppm b = 0c to +70c, 10 ppm c = C20c to +70c, 15 ppm model a = em b = eqm full environmental testing c = eqm reduced environmental testing d = qm e = fm level s f = fm level s with combined bi-aging g = fm level b h = fm level b with combined bi-aging i = fm + group c te 200 20m000000 frequency, fnom e a 1 wave form 1 = sine frequency pulling range 1 = 40 ppm 2 = 70 ppm 1 1
|
